Part 520: Palette & Chisel, October 1927 – Creating Stock Scenery
Thomas G. Moses was a member of the Palette and Chisel Club in Chicago and contributed a variety of articles to their monthly newsletter during the late 1920s. His series “Stage Scenery” began during September 1927, however, it was originally written during the spring of 1918.
Here is the third part of Moses’ “Stage Scenery” in the Palette & Chisel newsletter during October 1927:
“The material used to paint on is a fine grade Russian linen and a heavy grade of cotton cloth. Linen is used for all scenery on frames; the cotton is used for drops and borders, usually called “hangers.” The lumber is a fine grade of clear, white pine, without knots or sap. It has to be very clear and straight grained so it will stand upright without too much bracing.
After the canvas has been carefully prepared with a priming coat of whiting and glue is thoroughly dried, the artist draws his design with charcoal, which must be carefully done. In many cases the model must be laid off in squares and the same is carried up on the drop or set pieces. This enables the artist to produce the model exactly as part of the paint frame is below the bridge most of the time so the artist cannot see all of the drop. After the scene is drawn in it is traced with ink, which enables the artist to lay in the main local colors without destroying the drawing. The drawing out of an interior is very laborious. The work has to be done very accurately and pounces and stencils made, as there are many pieces to be covered.
In case of a landscape, they sky is laid in first, distance follows, then the middle distance, and there are many pieces to be covered.
In case of a landscape, the sky is laid in first, distance follows, then the middle distance, and the foreground last. The trees are run up when the sky is dry, which takes a short time. After all the broad “masses” of the “lay in” are dry and a clean palette has been arranged by the “paint boy” and the pots and pails holding the “lay in” are placed under the palette, “(a clear space is required for the many tints that are mixed on the palette, several small cups of dark purple and a strong rich color is used to emphasize the darks in the foreground) comes the careful work of finishing a landscape; strong shadows and half tones in foliage up to the strongest flickering of sunlight. We now take a little more time for our work. The “lay in” had to be done very quickly as it is very essential that the colors be kept will blend, which, in turn, makes the “cut up” easier. A drop representing a landscape 24×36 feet in size can be “laid in” with a lot of rough detail inside of two or three hours and retain wet edges.
As the distemper colors dry out several shades lighter t causes many anxious moments to a novice. There was no trouble with color fading or changing before fireproofing; it eats all the blue (especially Cobalt) out of purple, leaving a bad color, neither a blue nor red, which makes trouble for the artist.
In most cases, in painting a landscape, the artist endeavors to obtain his dark colors in the “lay in” so that when the “cut up” comes it will be all light colors. Most of the artists start to finish the drops from the foreground, getting the strength of the foreground first. Big, broad strokes are what count. It may look rather coarse close by, but when the completed scene is properly lighted you will find a surprise awaiting you. We know how to light a scene, but often some of our best effects are purely accidental. We follow these accidents up, develop them, and find soft, atmospheric color, all to be done with electricity.
Stock scenery for small halls and opera houses and for large vaudeville theatres has grown to be quite a business. Scenic studios have sprung up like mushrooms all over the country. To get the very best facilities for handling all sizes of scenery, the studio has to have a height of at least 54 feet, allowing a drop 30 feet high to be painted from a stationary floor, 24 feet from the basement floor. The width of the studio should be at least 50 feet and 150 feet in length. A building of these dimensions will accommodate fifteen paint frames, giving work for fifteen artists, five paint boys, four helpers to handle the scenery on and off the frames, two sewing women and six carpenters to build and prepare the frames for the scenes. This would constitute a first class studio and turn put a lot of work.”
To be continued…
